- Joined
- Sep 2, 2019
- Messages
- 99
- Reaction score
- 10
Folks: I’m building a WagAero Sport Trainer using a ‘43 L-4 fuselage. Before drilling the spars, I thought I’d just make sure everything was going to fit so I went to work with my tape measure. I found that the height of the 6 1/4” wood spar(front) is going to interfere with the fairing tubing by about 1/4”. Should I tear the birdcage off and raise it an inch (probably the right way) or maybe just heat the fairing tubing and move it up 1/4”? I had considered just relocating the mounts to allow clearance, but that so often creates problems downstream starting with strut adjustment flexibility, etc
Thanks for any words of wisdom.
Sarpy Sam
Thanks for any words of wisdom.
Sarpy Sam