• J3-Cub.com is the largest community of J3-Cub pilots, owners and enthusiasts. With over 1000 active members, we have fostered a vibrant community and extensive knowledge base. J3-Cub.com hosts a library of over 13 years of technical discussions, J3 data, tutorials, plane builds, guides, technical manuals and more. J3-Cub.com also hosts an extensive library of J3-Cub photos.

    Access to the J3-Cub.com community is by subscription only. Membership is only $19.99/year or $3.99/month to gain access to this community and extensive unmatched library of knowledge.

    Click Here to Become a Subscribing Member

Used servicable Nutplate Drills

will767

Well-Known Member
Joined
Sep 9, 2006
Messages
204
Reaction score
8
Probably not for the Cub restorer, but if any of you are building or know someone building an aluminum homebuilt this tool is really handy. Just drill a pilot hole "the hole for the screw being used" then put the center mandrel in that hole and it drills the two rivet holes in perfect position, also countersinking the hole if desired.
If you know anyone interested in more information have them write me at [email protected] Jim Swayze

Nutplate Drill 11 sixteenth inch rivit spacing # 3.JPG


Nutplate Drill 1 half inch rivit spacing #2.JPG


Nutplate Drill 11 sixteenth inch rivit spacing # 2.JPG


Nutplate Drill 11 sixteenth inch rivit spacing # 3.JPG


Nutplate Drill 1 half inch rivit spacing #2.JPG


Nutplate Drill 11 sixteenth inch rivit spacing # 2.JPG
 
Top