• J3-Cub.com is the largest community of J3-Cub pilots, owners and enthusiasts. With over 1000 active members, we have fostered a vibrant community and extensive knowledge base. J3-Cub.com hosts a library of over 13 years of technical discussions, J3 data, tutorials, plane builds, guides, technical manuals and more. J3-Cub.com also hosts an extensive library of J3-Cub photos.

    Access to the J3-Cub.com community is by subscription only. Membership is only $19.99/year or $3.99/month to gain access to this community and extensive unmatched library of knowledge.

    Click Here to Become a Subscribing Member

Source for PA-11 Motor Mount

supercub

Well-Known Member
Supporting Member
Joined
Nov 12, 2007
Messages
468
Reaction score
38
I'm looking for a PA-11 Motor mount that is STC'd for a 0-200 100hp engine. Thanks for the help
Brian

 

JimC

Well-Known Member
Supporting Member
Joined
Feb 26, 2007
Messages
13,348
Reaction score
1,749
Brian, have you checked with Joel at the Cub Club for previously approved 337's and STC's ?

Physically, the O-200 will fit the stock 11 mount.

JimC
 

DaveG

Well-Known Member
Joined
Mar 27, 2007
Messages
62
Reaction score
3
<Physically, the O-200 will fit the stock 11 mount.>
Well...Kind of
FWIW,
I used a PA-11 mount on my new Cub and had to make some 1/2 in spacers to get the oil tank to clear the lower diagonal tube.....Maybe it would be OK with the smaller sumps....
DaveG
 

JimC

Well-Known Member
Supporting Member
Joined
Feb 26, 2007
Messages
13,348
Reaction score
1,749
years ago, I put an O-200 on my PA-11, using the stock mount and the O-200 oil tank. It fit fine, no spacers needed. As an aside, it&#039;s the same O-200 that I now have on the J3.
Airplanes is weird....
JimC
 

Latest posts

Top