tonyhoskins
Well-Known Member
- Joined
- Feb 22, 2007
- Messages
- 193
- Reaction score
- 0
Applicable to all though, one will help me out, the other purely inquisitive!
Firstly, has anybody got a diagram of the fitting arrangement for the cluster Rear Lower Stick Stub, Stick Link tube, and belcrank push/pull rod. They all come together with one bolt, but which bit goes where - the Parts catalogue for both the J3 and the L4 don't show this, and i can't find anything in Cub clues! Help!
And, just for info - the little screw welded in the center of the upper tube of the quad mount for the engine bearer - i guess its a jigging or referance point of somesorts. i imagine useless after you've fitted the firewall and boot cowl - so whats it there for?
Rgds
Tony
Firstly, has anybody got a diagram of the fitting arrangement for the cluster Rear Lower Stick Stub, Stick Link tube, and belcrank push/pull rod. They all come together with one bolt, but which bit goes where - the Parts catalogue for both the J3 and the L4 don't show this, and i can't find anything in Cub clues! Help!
And, just for info - the little screw welded in the center of the upper tube of the quad mount for the engine bearer - i guess its a jigging or referance point of somesorts. i imagine useless after you've fitted the firewall and boot cowl - so whats it there for?
Rgds
Tony