• J3-Cub.com is the largest community of J3-Cub pilots, owners and enthusiasts. With over 1000 active members, we have fostered a vibrant community and extensive knowledge base. J3-Cub.com hosts a library of over 13 years of technical discussions, J3 data, tutorials, plane builds, guides, technical manuals and more. J3-Cub.com also hosts an extensive library of J3-Cub photos.

    Access to the J3-Cub.com community is by subscription only. Membership is only $49.99/year or $6.99/month to gain access to this community and extensive unmatched library of knowledge.

    Click Here to Become a Subscribing Member

    You will also get two J3-Cub decals as well!

Fabric split on top of wing

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jimrice

Well-Known Member
Lifetime Supporter
Joined
Jul 3, 2007
Messages
4,791
Reaction score
1,185
Putting my Cub away yesterday I noticed a three inch split in the top of the right wing just forward of the trailing edge and just outboard of the butt rib. There is a diagonal brace directly under the split which runs from the trailing edge to the butt rib. There is no reinforcing tape over the fabric there. The fabric touches the diagonal brace so I am assuming it is either bent/misaligned or there should be a tape or both. At any rate, I'm going to be needing a patch on my wing. :(

I haven't checked on my brother's Cub, don't expect the fabric should be touching the brace. Thoughts?


Sent from my iPhone using Tapatalk
 
Back
Top