Sasquatch
Well-Known Member
- Joined
- Dec 14, 2014
- Messages
- 292
- Reaction score
- 62
Just trying to get a handle on my carb heat check with my C-85.
When I was learning this winter, temps were around 20 degrees and at 1700rpm run-up, I would get an rpm drop of 80+ rpm, last week it was 80 degrees and I only got maybe a 25 rpm drop at run up. This makes sense that this would happen, just want to make sure it's normal. Carb heat flap has full movement.
All the info I can find just says a slight rpm drop should be noted, and I always leave it on to make sure there isn't roughness and then an increase.
As always thanks for the info.
When I was learning this winter, temps were around 20 degrees and at 1700rpm run-up, I would get an rpm drop of 80+ rpm, last week it was 80 degrees and I only got maybe a 25 rpm drop at run up. This makes sense that this would happen, just want to make sure it's normal. Carb heat flap has full movement.
All the info I can find just says a slight rpm drop should be noted, and I always leave it on to make sure there isn't roughness and then an increase.
As always thanks for the info.