- Joined
- Nov 16, 2021
- Messages
- 112
- Reaction score
- 32
The angle the cable to throttle arm makes is too small causing a rapid increase when moved from idle. I can probably solve that by just rotating the arm to a difference position on the throttle shaft.
The cable is mounted to the air box and routed under the kidney.
However I've been told that others route the cable over the kidney rather than under as was done on mine. If I do that there will be a lot of extra cable to find a place to hide.
What are your opinions? This is a J3C65.
The cable is mounted to the air box and routed under the kidney.
However I've been told that others route the cable over the kidney rather than under as was done on mine. If I do that there will be a lot of extra cable to find a place to hide.
What are your opinions? This is a J3C65.
