Going through some more boxes of Cub stuff my dad had I ran across the following tools. I figure they are most likely Cub related tools or Franklin engine specific stuff. Anyone have any information? Thanks Scott:
First one, I figure is used to pop the pushrod tubes in place with the seals on when mounting cylinders to the case. As you can see from the second picture, it threads on the valve rocker arm block studs and the machined step end fits in the pushrod tube. Am I missing anything here?
Second Picture:
First one, I figure is used to pop the pushrod tubes in place with the seals on when mounting cylinders to the case. As you can see from the second picture, it threads on the valve rocker arm block studs and the machined step end fits in the pushrod tube. Am I missing anything here?
Second Picture:
Last edited:
