VIEW MY

acinc12

Supporting Member

Gift Premium Subscription To acinc12

Join Date:

06-10-2011

Last Activity:

04-20-2018 11:01 PM

Likes Given: 7

LATEST ACTIVITY

  • Posted in thread: Delayed Starting on 10-22-2017 at 08:03 PM
    What happened when you tried this? Originally Posted by cubdriver2 View PostIf you leave the
    throttle closed on a Stromberg it will suck fuel up thru the idle circuit and flood it, you
    need to advance...

  • Posted in thread: Delayed Starting on 10-20-2017 at 10:52 AM
    What happened when you tried this? Originally Posted by cubdriver2 View PostIf you leave the
    throttle closed on a Stromberg it will suck fuel up thru the idle circuit and flood it, you
    need to advance...

  • Posted in thread: Delayed Starting on 10-20-2017 at 12:31 AM
    Still having a hard time starting after shutting down for an hour or so. Tried suggestions made
    in this tread - they worked, just for awhile. Sent magnetos to Quality Aircraft Accessories in
    Florida f...

  • Posted in thread: Reinstallation of naugahyde cable seals on 10-16-2017 at 02:08 PM
    Thank you everyone for the suggestions. I have already ordered one each (thank goodness for the
    Internet) of the adhesives and a source for the leather reinforcement patches. Had seen the
    leather rein...

  • Posted in thread: Reinstallation of naugahyde cable seals on 10-15-2017 at 01:46 AM
    Thank you Bob, will give it a try. Joe Soderquist

  • Posted in thread: Reinstallation of naugahyde cable seals on 10-10-2017 at 02:30 PM
    The edges of the cable seals on my Ceconite 102 (finished with Randolph Butyrate) airframe skin
    have rolled up again. I had them reinstalled about 5 years ago. The re-gluing was done very
    sloppy with ...

  • Posted in thread: Delayed Starting on 08-10-2017 at 07:23 PM
    I got around this problem by shutting off the fuel valve, before killing the engine. Usually
    never have the problem then. I think its because the carb float needle valve is leaking a
    little and you ge...

  • Posted in thread: Delayed Starting on 08-10-2017 at 07:14 PM
    I got around this problem by shutting off the fuel valve, before killing the engine. Usually
    never have the problem then. I think its because the carb float needle valve is leaking a
    little and you ge...

  • Posted in thread: Delayed Starting on 08-09-2017 at 12:21 AM
    I am able to prop and start my J3-C65 without any trouble the first time every day. But when I
    fly somewhere, stop the engine and try and restart it an hour later, it will not start. It is
    fairly hot ...

  • Posted in thread: Sensenich wood prop retorque timing on 12-07-2016 at 09:43 PM
    I had a new Sensenich wooden prop installed on my J3-65C in 2012 and have about 130 hours on it
    now. I believe that at each annual since then the prop bolts were retorqued. At the 2016 annual
    my IA sa...

0 COMMENTS
POST A COMMENT