VIEW MY

Cub Builder

Gift Premium Subscription To Cub Builder

Join Date:

11-21-2011

Last Activity:

05-22-2018 2:52 AM

Likes Given: 21

146 Likes on 96 Posts 

LATEST ACTIVITY

  • Posted in thread: Light Speed cheapie noise canceling headsets? on 04-03-2018 at 02:14 AM
    Carry your own headsets if you prefer them. The airlines won't mind.FWIW, I have flown with the
    old cheap first model light speed ANR headsets for the last 20 years. I changed them to DC gel
    ear seals...

  • Posted in thread: realistic cruise altitude for mountain x country on 03-11-2018 at 12:24 AM
    Avflyguy---Your 2 cents appreciated! Worth a ton more than that to me. ALL input and photos
    appreciated from everyone. I don't have an ego big enough to bluff myself. I have pushed my
    envelope (hang g...

  • Posted in thread: realistic cruise altitude for mountain x country on 03-05-2018 at 02:22 AM
    I had a 65 hp J-4 based at 7200' in Northern NM for a few years. Climb was slow, but it will
    handle the altitude. Just be patient with it.

  • Posted in thread: More Burglars on 02-07-2018 at 12:36 AM
    Gosh, it should be hours before the legal system turns him loose again. :mad:

  • Posted in thread: Prop and Crankshaft Advice on 02-06-2018 at 02:12 PM
    I use the uncut seal. Remove the spring from the back. and connect the spring back together
    behind the prop hub. Put seal in a cup and heat in the microwave until it boils. Let it sit in
    the water for...

  • Posted in thread: Prop and Crankshaft Advice on 02-06-2018 at 03:02 AM
    All other things being equal, I prefer the flanged cranks. I've seen lots of problems with the
    flanges on the taper shafts; mostly in that they don't track true. I've never found it to be
    much of a pr...

  • Posted in thread: Cub on Oahu on 01-29-2018 at 08:08 PM
    Last I knew there was a Champ available as a rental at Kalaeloa (Barbers Point). Seems to me
    they may have had a Stearman out there as well, but my memory might be a bit fuzzy on that.
    There is a soar...

  • Posted in thread: New pushrod tube seals? on 01-20-2018 at 02:48 PM
    Continental also sells this as an option when you buy new cylinders (O-200). I wasn't aware
    there was a field modification to this type of seal, although it doesn't surprise me. When you
    buy new cylin...

  • Posted in thread: C85 or C90 Desired/Recommends on 01-08-2018 at 11:21 PM
    I have a friend that has an O-200 with the Don's Dream Machines mod to a -8 accessory case. I
    haven't looked at the logs, but it is supposed to be very low time and could probably be had
    for a reasona...

  • Posted in thread: Engine for sale on Piper FB page on 01-04-2018 at 03:28 PM
    That is an aluminum prop extension made by Saber Manufacturing. It is mounted to the prop
    flange, then has a flange for the prop to mount to. Looks like their 3" extension.

FORUM SIGNATURE
0 COMMENTS
POST A COMMENT